Nuts and Washers Selector

Product Type

Thread Size

Material / Finish

Length

Need Help?

Stainless Steel Fasteners

Stainless Steel Fasteners

Stainless Steel Fasteners: Nuts, bolts, washers etc

  • Hemispherical washer
    Hemispherical washer

    Hemispherical Washers are half a sphere with a hole perpendicular to the flat side which corresponds to the thread size you will use it with. They are used alongside hemispherical cups which sit together allowing for up to 10 degrees movement from the vertical.

     

  • Washers
    Washers

    Choose from our wide range of stainless steel washers for example flat, shakeproof and spring washers.

  • Hemispherical cup
    Hemispherical cup

    Hemispherical Cups are cylindrical with part of a sphere cut out of one side with a hole in the center that corresponds to the thread size being used. They are used alongside hemispherical washers which sit together allowing for up to 10 degrees movement from the vertical.

  • DIN 444 Eye rod / Swing Rod / Eye Bolts
    DIN 444 Eye rod / Swing Rod / Eye Bolts

    DIN 444 Eye rod / Swing Rod / Eye Bolts

  • Stainless steel and Xylan Coated eyelet screws
    Stainless steel and Xylan Coated eyelet screws

    Stainless steel and Xylan Coated eyelet screws

    Normally used for sewing, jewellery making, art and craft
     
    These eyelets are either A2 (T304) stainless steel or xylan coated. Xylan is a PTFE / Teflon coating which reduced friction. This allows the cord to slip while reducing the tendancy for chaffing the cord.
     
    Great for Roman Blinds
  • Countersunk Socket Cap Screw
    Countersunk Socket Cap Screw

    Stainless Steel Countersunk Socket Cap Screw, these are useful when an allen key is needed to be used to tighten the bolt into place but a flush method is required stopping an allen socket capscrew being used.

  • Stainless Steel Self Locking Nuts
    Stainless Steel Self Locking Nuts

    Stainless Steel self locking nuts, some of the widely known designs are Aerotight, Nylock, Staytight and Philidas.

  • Stainless Steel Hexagon Head bolts
    Stainless Steel Hexagon Head bolts

    Choose between our A2 or A4 Grade Stainless Steel Hex Bolts, both grades have a range of thread sizes and lengths.

  • Hexagon Head Set Screws
    Hexagon Head Set Screws

    Choose between our A2 or A4 Grade Stainless Steel Hex Bolts, both grades have a range of thread sizes and lengths.

  • Allen Head Socket Capscrew
    Allen Head Socket Capscrew

    Allen Head Socket Capscrews have a small cylindrical head with a six sided internal grip for use with an allen key, they have a machined thread of different sizes and many different lengths.

  • Hex head Woodscrews
    Hex head Woodscrews

    Stainless Steel Hex-Head Woodscrews also known as Lag Bolts. These are used to support heavier loads than a standard woodscrew and require a pilot hole unlike some woodscrews, hex head woodscrews are more suitable than a standard woodscrew when a large amount of torque is required.

  • Counter Sunk PoziDrive Woodscrews
    Counter Sunk PoziDrive Woodscrews

    Stainless Steel Counter Sunk PoziDrive Woodscrews, these are useful when securing lengths of wood to wood or when screwimg through an object into wood.

  • Wing Nuts
    Wing Nuts

    Stainless Steel wing nuts, these nuts are used when you want to secure an object with some form of bolt but don't want to use tools.

  • Hexagon Domed Cap Nuts
    Hexagon Domed Cap Nuts

    Hexagon Domed Cap Nuts, Dome Nut or Acorn Nut, these are used on the end of a length of thread for aesthetic purposes or to protect the end of the thread from damage.

  • Mushroom Head Square Neck Bolts
    Mushroom Head Square Neck Bolts

    Stainless Steel Mushroom Head Square Neck Bolts, these are usually used when securing metal to wood, this is performed by having in one material a recessed square for the neck of the bolt and a standard circle in the other so the fitting can be tightened from just one side by hand with a wing nut or with a spanner with a different type of nut.

  • Hexagonal Nuts
    Hexagonal Nuts

    A range of Stainless Steel full nuts, half nuts (lock), left hand thread (LHT) and fine pitch nuts in both A2 (T304) and A4 (T316)

  • Split / Cotter Pins
    Split / Cotter Pins
    Stainless Steel Split / Cotter Pins. Fastner with two tines that are bent during installation, similar to a staple or rivet. With a half-circular cross section. Split pins are measured by the size of the hole they are inserted to. The split pin is a loose fit within the hole
  • Rivet Nuts Stainless Steel and Zinc Plated Mild Steel
    Rivet Nuts Stainless Steel and Zinc Plated Mild Steel

    Rivet Nuts are a one piece internally threaded rivet that is anchored entirely from one side, this particular type bulge on the other side to the circular base securing it in position.

  • Stainless Steel Plate Washers
    Stainless Steel Plate Washers

    Stainless Steel Plate Washers

  • Shear / Tamper Proof Nuts
    Shear / Tamper Proof Nuts

    Shear nuts are also known as breakaway nuts, inviolable nuts, snap off nuts, security nuts, tamper proof nuts or permacone nuts. They are a permanent security solution ideal where maintenance is not required.

    They are designed to prevent unauthorised tampering or removal of equipment and facilities. They are typically used in public areas (schools, hospitals etc) and within the fencing industry, e.g. for security perimeter fencing.

    Tightened using standard spanner or socket

    Breakaway nuts – how they work:
    The hexagon nut section is fully tightened with a standard spanner until the pressure applied exceeds the maximum torque limit, which causes the hexagonal part of the nut to break off. This leaves a plain tamper resistant cone shape which is extremely difficult to remove as there is nothing to grip.

  • Din 557 Chamfered Square Nuts - Stainless Steel
    Din 557 Chamfered Square Nuts - Stainless Steel

    Din 557 Chamfered Square Nuts - Stainless Steel

  • DIN 316 Stainless Steel Wing / Butterfly Screws
    DIN 316 Stainless Steel Wing / Butterfly Screws

    DIN 316 Stainless Steel Wing / Butterfly Screws. There are two wing like projections from the head of the screw. which makes it possible to use your thumb and finger to turn and tighten the screw rather than a wrench or other tool. This allows an easy rapid assembly and disassembly. Fully threaded and can be used for many applications where quick hand tensioning and clamping is required

  • Slotted Cheese head machine Screws (DIN 84) Stainless Steel
    Slotted Cheese head machine Screws (DIN 84) Stainless Steel

    Slotted Cheese head machine Screws (DIN 84) Stainless Steel

  • Hexagon Socket Button Head Screws With Flange
    Hexagon Socket Button Head Screws With Flange

    Hexagon Socket Button Head Screws With Flange - similar to ISO 7380

  • Mushroom Head Slotted Screws
    Mushroom Head Slotted Screws

    Mushroom Head Slotted Screws

  • Hexagon Socket Button Head Screws
    Hexagon Socket Button Head Screws

    Hexagon Socket Button Head Screws - Similar to ISO 7380

  • Hexagon Head Bolt with Flange (No serration) Din 6951 -  Stainless Steel
    Hexagon Head Bolt with Flange (No serration) Din 6951 - Stainless Steel

    Hexagon Head Bolt with Flange (No serration) Din 6951 -  Stainless Steel

  • Long Spring Nuts
    Long Spring Nuts

    Long Spring Nuts (Zebedee Nuts / Channel Nuts)

per page
Showing 1 - 9 of 290 items
Showing 1 - 9 of 290 items

Recently Viewed

No products
Top
Compare 0