Screws & Bolts

DIN 444 Eye rod / Swing Rod / Eye Bolts

DIN 444 Eye rod / Swing Rod / Eye Bolts
Stainless steel and Xylan Coated eyelet screws

Stainless steel and Xylan Coated eyelet screws

Normally used for sewing, jewellery making, art and craft

These eyelets are either A2 (T304) stainless steel or xylan coated. Xylan is a PTFE / Teflon coating which reduced friction. This allows the cord to slip while reducing the tendancy for chaffing the cord.

Great for Roman Blinds
Countersunk Socket Cap Screw - Din 7991

Countersunk Socket Cap Screw, these are useful when an allen key is needed to be used to tighten the bolt into place but a flush method is required stopping an allen socket capscrew being used.
Chemical / Resin Bolts

Chemical or resin anchors are generic terms relating to steel studs, bolts and anchorages which are bonded into a substrate, usually masonry and concrete, using a resin based adhesive system. Ideally suited for high load applications, in virtually all cases the resulting bond is stronger than the base material itself and as the system is based on chemical adhesion
Hexagon Head Set Screws - DIN 933

Available in A2 or A4 Grade Stainless, Zinc plated or full galvanised Steel Hex Bolts

Din 933 is the standard for Hexagonal Head Set Screws.

We define the difference between a bolt and a screw in this way: a screw is fully threaded, wheras a bolt will be partically threaded

Din 933 is to all intents and purposes the same as ISO 4017 and UNI 5739
Allen Head Socket Capscrew

Allen Head Socket Capscrews have a small cylindrical head with a six sided internal grip for use with an allen key, they have a machined thread of different sizes and many different lengths.
Hex head Woodscrews - Din 571

Stainless Steel Hex-Head Woodscrews also known as Lag Bolts. These are used to support heavier loads than a standard woodscrew and require a pilot hole unlike some woodscrews, hex head woodscrews are more suitable than a standard woodscrew when a large amount of torque is required.
Counter Sunk PoziDrive Woodscrews

Stainless Steel Counter Sunk PoziDrive Woodscrews, these are useful when securing lengths of wood to wood or when screwimg through an object into wood.
Mushroom Head Square Neck Bolts

Stainless Steel Mushroom Head Square Neck Bolts, these are usually used when securing metal to wood, this is performed by having in one material a recessed square for the neck of the bolt and a standard circle in the other so the fitting can be tightened from just one side by hand with a wing nut or with a spanner with a different type of nut.
DIN 316 Stainless Steel Wing / Butterfly Screws

DIN 316 Stainless Steel Wing / Butterfly Screws. There are two wing like projections from the head of the screw. which makes it possible to use your thumb and finger to turn and tighten the screw rather than a wrench or other tool. This allows an easy rapid assembly and disassembly. Fully threaded and can be used for many applications where quick hand tensioning and clamping is required
Slotted Cheese head machine Screws (DIN 84) Stainless Steel

Slotted Cheese head machine Screws (DIN 84) Stainless Steel
Hexagon Socket Button Head Screws With Flange

Hexagon Socket Button Head Screws With Flange - similar to ISO 7380
Mushroom Head Slotted Screws

Mushroom Head Slotted Screws
Hexagon Socket Button Head Screws

Hexagon Socket Button Head Screws - Similar to ISO 7380
Hexagon Head Bolt with Flange (No serration) Din 6951 - Stainless Steel

Hexagon Head Bolt with Flange (No serration) Din 6951 - Stainless Steel
Steel Hexagon Head bolts - Din 931

Choose between our A2 or A4 Grade Stainless Steel or Galvanised Mild Steel Hex Bolts, all grades have a range of thread sizes and lengths. Din 931
Square 'L' hook with wood screw thread

Square 'L' hook with wood screw thread
Tie Bars

Tie Bars