These ubolts have been developed to enable pipes to be securely guided with a minimum of friction so safe-guarding the pipe from expansion & contraction wear due to temperature changes; whilst also reducing the noise & vibration of the pipe.
They are fitted with a gap between the ubolt and the pipe enabling the pipe to expand & contract yet keeping it fully guided in position.
The rubber base pad acts to reduce the noise & vibration of the pipes as they carry their fluid and it is fitted with a PTFE strip to reduce the friction and hence protects the pipe as it expands & contracts.
The patented-pending ubolt sleeve is a low friction silicone rubber which rotates around the ubolt to enable the pipe to move unrestricted but be fully guided in position on the supporting framework.
These are a much cheaper and more reliable solution to the conventional rubber lined ubolts which have PTFE bonded to the inside surface of the rubber coated ubolt.
Although Ubolts with the PTFE strip bonded to the rubber profile around the ubolts have been in common use for many years, they are prone to the PTFE separating from the rubber due to the difference in the expansion coefficient of the rubber and the PTFE. This problem is eliminated by Graphskill’s unique solution of a single medium with minimal friction.
|Pipe Nominal Bore||40|
|Design||Rubber Lined - Low friction|
We offer a range of delivery options based on the weight of the overall shopping cart and your specific location.
After adding the products to the shopping cart you will see a range of options based on delivery to mainland UK. Change country and the delivery options will be modified for your address.
NEED PART DELIVERY?
Every product page and the cart shows current stock level. Our normal practice is to only ship the full order, unless the shortfall is our fault.
If you can see we are short of stock and want to receive what we have as soon as possible, and the remainder when they are available, then add this product to the shopping cart also: