Spring-Type Slotted Straight Pin T301 Stainless Steel (Roll / Tension Pins) - ISO 8752
Spring-Type Slotted Straight Pin T301 Stainless Steel (Roll / Tension Pins) - ISO 8752 - ISO 8752
Sizes available:
M1.5 x 6 mm, M1.5 x 12 mm, M2 x 8 mm, M2 x 14 mm, M2 x 20 mm, M2.5 x 8 mm, M2.5 x 12 mm, M2.5 x 20 mm, M3 x 8 mm, M3 x 12 mm, M3 x 20 mm, M3.5 x 12 mm, M4 x 16 mm, M4 x 24 mm, M5 x 20 mm, M5 x 40 mm, 6M x 20 mm, M6 x 60 mm & M8 x 20 mm
| Quantity | Discount | Unit price |
|---|---|---|
| 50 | 10% | £ 0.02 |
| 80 | 15% | £ 0.02 |
| 100 | 20% | £ 0.02 |
| 200 | 25% | £ 0.02 |
| 500 | 30% | £ 0.02 |
| 1000 | 35% | £ 0.02 |
| 2000 | 40% | £ 0.01 |
Volume discounts
| Quantity | Price |
|---|---|
| 50 | 10% |
| 80 | 15% |
| 100 | 20% |
| 200 | 25% |
| 500 | 30% |
| 1000 | 35% |
| 2000 | 40% |
Spring-Type Slotted Straight Pin T301 Stainless Steel (Roll / Tension Pins) - ISO 8752
ISO 8752 [Replaces DIN 1481].
Spring pins are a very reliable low-cost fastening system. Manufactured to a diameter greater than the drilled hole into which it is pressed. The purpose of the slot in the pin is to allow compression when inserted in the hole. The outward spring forces act positively in preventing loosening by vibration. Typical applications use spring pins as Fasteners to secure handles and gears to shafts, Retaining pins, Axle shafts, Stop pins, Hinge and pivot applications, Crossbars, Tube reinforcing pins, Locator pins
Dimensions (mm):
| Size (Nominal) | a (min) | d1 (min) | d2 | s | l | Drawing |
| M1.5 | 0.25 | 1.7 | 1.1 | 0.3 | As Selected | |
| M2 | 0.35 | 2.3 | 1.5 | 0.4 | As Selected | |
| M2.5 | 0.4 | 2.8 | 1.8 | 0.5 | As Selected | |
| M3 | 0.5 | 3.3 | 2.1 | 0.6 | As Selected | |
| M3.5 | 0.6 | 3.8 | 2.3 | 0.75 | As Selected | |
| M4 | 0.65 | 4.4 | 2.8 | 0.8 | As Selected | |
| M4.5 | 0.8 | 4.9 | 2.9 | 1 | As Selected | |
| M5 | 0.9 | 5.4 | 3.4 | 1 | As Selected | |
| M6 | 1.2 | 6.4 | 3.9 | 1.25 | As Selected | |
| M8 | 2 | 8.5 | 5.5 | 1.5 | As Selected | |
| M10 | 2 | 10.5 | 6.5 | 2 | As Selected | |
| M12 | 2 | 12.5 | 7.5 | 2.5 | As Selected |
T301 Stainless Steel is an austenitic stainless steel with a nominal composition of 17 percent chromium and 7 percent nickel, which provides good strength and ductility when cold worked. It is a little less resistant to rust than T304 and more likely to be magnetised after cold working.
We offer a range of delivery options based on the weight of the overall shopping cart and your specific location.
After adding the products to the shopping cart you will see a range of options based on delivery to mainland UK. Change country and the delivery options will be modified for your address.
- Please be aware of our latest order times for same-day dispatch (2 PM)
- We ship orders every weekday
- Be aware of current stock levels (shown on the product page and the checkout page)
- Be aware of our shipping terms and conditions (CLICK HERE) which basically state we may upgrade delivery at our discretion and that we are not responsible for late deliveries outside of our control
NEED PART DELIVERY?
Every product page and the cart shows the current stock level. Our normal practice is to only ship the full order unless the shortfall is our fault.
If you can see we are short of stock and want to receive what we have as soon as possible, and the remainder when they are available, then add this product to the shopping cart also (UK Only):
