Hot-Formed Weldless Eyenut - T316 & T304 Stainless Steel
Hot-Formed Weldless Eyenut - T316 & T304 Stainless Steel. A range of thread sizes available including some left hand threads
M6, M8, M10, M12, M16, M20, M24 & M30
| Quantity | Discount | Unit price |
|---|---|---|
| 50 | 10% | £ 14.88 |
| 80 | 15% | £ 14.06 |
| 100 | 20% | £ 13.23 |
| 200 | 25% | £ 12.40 |
| 500 | 30% | £ 11.58 |
| 1000 | 35% | £ 10.75 |
| 2000 | 40% | £ 9.92 |
Accessories
Volume discounts
| Quantity | Price |
|---|---|
| 50 | 10% |
| 80 | 15% |
| 100 | 20% |
| 200 | 25% |
| 500 | 30% |
| 1000 | 35% |
| 2000 | 40% |
Hot-Formed Weldless Eyenut - T316 & T304 Stainless Steel. A range of thread sizes available including some left hand threads
| Thread Size | B | C | D | E | F | G | R | P |
| M6 | 18 | 25 | 10 | 6 | 45 | 13 | 15 | 13 |
| M8 | 18 | 25 | 12 | 6 | 45 | 13 | 15 | 13 |
| M10 | 22 | 30 | 14 | 8 | 55 | 16 | 18 | 16 |
| M12 | 25 | 30 | 18 | 10 | 60 | 18 | 20 | 18 |
| M16 | 30 | 35 | 22 | 12 | 65 | 22 | 24 | 22 |
| M20 | 35 | 40 | 26 | 15 | 75 | 24 | 27 | 24 |
| M24 | 45 | 45 | 30 | 18 | 95 | 30 | 35 | 30 |
| M30 | 50 | 54 | 36 | 22 | 110 | 34 | 40 | 35 |
Where Dimension are:
Graphskill manufacture the Hot Formed Weldless Eyenut in the UK.
This unique design is manufactured from solid round bar which is then heated to allow the end to be flattened and the hole punched and therefore removes potential 'weld' weak spots.
Because of the flattened end these are ideally suited to a hanger style pipe support, using a 3 bolt pipe clip. 3 bolt pipe clips would often be used where the pipe is perhaps insulated, so that the hanger rod would be outside of the insulation
A 3 bolt pipe clip:
.. but in reality you have a weldless eyenut there that the bolt goes through to fasten to the 3 bolt pipe clip, and then a length of studding is screwed into the top of the eyenut - like this:
Graphskill manufacture a range of these hot formed weldless eyenuts but non - standards can also be manufactured
| Material | T304 Stainless Steel (A2), T316 Stainless Steel (A4) |
| Thread Size | M6, M8, M10, M12, M16, M20, M24, M30 |
| Product Type | Weldness Eyenut |
We offer a range of delivery options based on the weight of the overall shopping cart and your specific location.
After adding the products to the shopping cart you will see a range of options based on delivery to mainland UK. Change country and the delivery options will be modified for your address.
- Please be aware of our latest order times for same-day dispatch (2 PM)
- We ship orders every weekday
- Be aware of current stock levels (shown on the product page and the checkout page)
- Be aware of our shipping terms and conditions (CLICK HERE) which basically state we may upgrade delivery at our discretion and that we are not responsible for late deliveries outside of our control
NEED PART DELIVERY?
Every product page and the cart shows the current stock level. Our normal practice is to only ship the full order unless the shortfall is our fault.
If you can see we are short of stock and want to receive what we have as soon as possible, and the remainder when they are available, then add this product to the shopping cart also (UK Only):
Use the blue buttons below to filter the list (Click once to apply filter, once again to remove):: |
|
|---|---|
| Material / Finish: | T304 (A2) Stainless Steel T316 (A4) Marine Grade Stainless Steel |
| Thread Size: | M6 M8 M10 M12 M16 M20 M24 M30 M12 - Left hand Thread M16 - Left hand Thread M20 - Left hand Thread M24 - Left hand Thread |
| Image | Reference | Thread Size | Material / Finish | Quantity | Availability | Price | Add to cart |
|---|---|---|---|---|---|---|---|
