Foam Pipe Cleaning Pig For British Standard Pipe
Foam Pipe Cleaning Pig For British Standard Pipe
Available Size: 8NB, 15NB, 20NB, 25NB, 32NB, 40NB, 50NB, 65NB, 80NB, 100NB, 125NB, 150NB, 200NB, 250NB, 300NB, 350NB, 400NB, 450NB, 500NB & 600NB
| Quantity | Discount | Unit price |
|---|---|---|
| 50 | 10% | £ 18.00 |
| 80 | 15% | £ 17.00 |
| 100 | 20% | £ 16.00 |
| 200 | 25% | £ 15.00 |
| 500 | 30% | £ 14.00 |
| 1000 | 35% | £ 13.00 |
| 2000 | 40% | £ 12.00 |
Accessories
Volume discounts
| Quantity | Price |
|---|---|
| 50 | 10% |
| 80 | 15% |
| 100 | 20% |
| 200 | 25% |
| 500 | 30% |
| 1000 | 35% |
| 2000 | 40% |
Foam Pipe Cleaning Pig For British Standard Pipe
Based around a British Standard Pipe Nominal Bore sizes, but please do check the measurements are suitable for your specific pipe inside diameter.
Graphskill foam pigs were developed to be used when cleaning newly fabricated pipelines of debris prior to the pipelines being commissioned. Though they do of course have a variety of uses
- cleaning pipes of old product ready for new product
- to dry pipes after washing
- to plug drilling equipment
- retaining inert gas for welding operations
- scrubbing and cleaning old pipes reducing the need for complete replacement
- and can be used as bungs to block dirt whilst pipes aren't in use.
The pigs can be pulled through a pipeline with a fishtape attached to their "Towing eye" to clear the line of welding and fabrication debris prior to commissioning.
Dimensions
| Size (Pipe NB) | Pack Quantity | Pig Diameter (D) | Pig Length (L) |
| 8 | 10 | 15 | 50 |
| 15 | 10 | 22 | 60 |
| 20 | 10 | 27 | 60 |
| 25 | 10 | 33 | 60 |
| 32 | 5 | 42 | 60 |
| 40 | 5 | 48 | 75 |
| 50 | 4 | 60 | 90 |
| 65 | 3 | 75 | 115 |
| 80 | 3 | 90 | 135 |
| 100 | 1 | 115 | 150 |
| 125 | 1 | 140 | 200 |
| 150 | 1 | 170 | 250 |
| 200 | 1 | 215 | 300 |
| 250 | 1 | 270 | 400 |
| 300 | 1 | 320 | 450 |
| 350 | 1 | 350 | 525 |
| 400 | 1 | 400 | 600 |
| 450 | 1 | 450 | 600 |
| 500 | 1 | 500 | 725 |
| 600 | 1 | 600 | 900 |
Typical Physical Properties
Physical properties are measured using test methods described in BS EN ISO 845:1995. (Determination of Density), BS EN ISO 2439 (Determination of Hardness), BS EN ISO1798 (Determination of Tensile Strength and Elongation) and BS EN ISO1856 (Determination of compression).
| Nominal Piece Density Range | 23-25 kg/m3 |
| Nominal Hardness (40%) Strength | 115-150N |
| Nominal Tensile Strength | Min 70 kPa |
| Nominal Elongation at Break | Min 140% |
| Nominal Compression Set | Av 18% |
We offer a range of delivery options based on the weight of the overall shopping cart and your specific location.
After adding the products to the shopping cart you will see a range of options based on delivery to mainland UK. Change country and the delivery options will be modified for your address.
- Please be aware of our latest order times for same-day dispatch (2 PM)
- We ship orders every weekday
- Be aware of current stock levels (shown on the product page and the checkout page)
- Be aware of our shipping terms and conditions (CLICK HERE) which basically state we may upgrade delivery at our discretion and that we are not responsible for late deliveries outside of our control
NEED PART DELIVERY?
Every product page and the cart shows the current stock level. Our normal practice is to only ship the full order unless the shortfall is our fault.
If you can see we are short of stock and want to receive what we have as soon as possible, and the remainder when they are available, then add this product to the shopping cart also (UK Only):
Use the blue buttons below to filter the list (Click once to apply filter, once again to remove):: |
|
|---|---|
| Pipe Nominal Bore (NB): | 8 (10 Pack) 15 (10 Pack) 20 (10 Pack) 25 (10 pack) 32 (5 Pack) 40 (5 Pack) 50 (4 Pack) 65 (3 Pack) 80 (3 Pack) 100 125 150 200 250 300 350 400 450 500 600 |
| Image | Reference | Pipe Nominal Bore (NB) | Quantity | Availability | Price | Add to cart |
|---|---|---|---|---|---|---|
