U-Bolt M10 x86 mm Thread, 62 mm Inside Diam, 138 mm Inside Height High Tensile Galvanised
U-Bolt M10 x86 mm Thread, 62 mm Inside Diam, 138 mm Inside Height High Tensile GalvanisedIncludes two nuts per legGraphskill standard U-BoltGalvanised - A duller finish than BZP, typically 50 microns thick covering of Zinc and therefore provides much more protection suitable for many out door applicationsAll Measurements in mm Inside Diameter : 62 Inside Height : 138 Leg Centers : 72 Leg Length : 107 Material : High Tensile Galvanised (HTGA) Pipe Nominal Bore : Suggested Pipe OD : 60 Thread length : 86 Thread Size : M10Our manufacturing tolerances are + / - 1 mm) We use roll threading so the diameter of the bar is usually less than the thread size. Please ask if unsureIf using your own nuts on galvanised products please ensure they are tapped oversize to allow for the galvanised layer
|Material||High Tensile Galvanised (HTGA)|
We offer a range of delivery options based on the weight of the overall shopping cart and your specific location.
After adding the products to the shopping cart you will see a range of options based on delivery to mainland UK. Change country and the delivery options will be modified for your address.
NEED PART DELIVERY?
Every product page and the cart shows current stock level. Our normal practice is to only ship the full order, unless the shortfall is our fault.
If you can see we are short of stock and want to receive what we have as soon as possible, and the remainder when they are available, then add this product to the shopping cart also: