UBOLT/L7GA/M6*31*76*57-N
New product
U-Bolt M6 x57 mm Thread, 31 mm ID, 75 mm IH Galv A320 L7 High tensile steel
Nuts not included with this itemGraphskill standard U-BoltASTM A320 L7 High Tensile Steel. Galvanised - A duller finish than BZP, typically 50 microns thick covering of Zinc and therefore provides much more protection suitable for many out door applicationsAll Measurements in mm Inside Diameter : 31 Inside Height : 75 Leg Centers : 37 Leg Length : 60 Material : A320 L7 Galvanised High tensile Steel Pipe Nominal Bore : Suggested Pipe OD : 29 Thread length : 57 Thread Size : M6Our manufacturing tolerances are + / - 1 mm) We use roll threading so the diameter of the bar is usually less than the thread size. Please ask if unsureIf using your own nuts on galvanised products please ensure they are tapped oversize to allow for the galvanised layerMaterial | A320 L7 Galvanised High tensile Steel |
Pipe OD | 29 |
Inside Diameter | 31 |
Inside Height | 75 |
Thread Size | M6 |
Leg Centers | 37 |
Leg Length | 60 |
Thread length | 57 |
Product Type | U-Bolt |
Design | Graphskill Standard |
We offer a range of delivery options based on the weight of the overall shopping cart and your specific location.
After adding the products to the shopping cart you will see a range of options based on delivery to mainland UK. Change country and the delivery options will be modified for your address.
NEED PART DELIVERY?
Every product page and the cart shows current stock level. Our normal practice is to only ship the full order, unless the shortfall is our fault.
If you can see we are short of stock and want to receive what we have as soon as possible, and the remainder when they are available, then add this product to the shopping cart also:
Quantity | Price |
---|---|
50 | £5.40 |
80 | £5.10 |
100 | £4.80 |
200 | £4.50 |
500 | £4.20 |
1000 | £3.90 |
2000 | £3.60 |
Order before 2 PM for same day dispatch for items in stock. Graphskill cannot be held responsible for any delays caused by delivery issues provided we have shipped your order at the required time.
Different carriers have different post code restrictions for standard deliveries.
Royal Mail 1 PM Service Delivery Restrictions
Normally before 1 PM on workdays, except:
Deliver by 5.30pm the next working day in the following postcode areas:
AB30 - 39, 41 - 45, 51 - 56
HS1, 3 - 9
IV21 - 28, 40 - 49, 51 - 56
KA27, 28
KW1 - 3, 5 - 15
KW16 Stromness Town only
PA20 (0&9)
PA28 - 38, 41 - 49, 76, 77
PH15, 17 - 26, 31 - 40, 49, 50
ZE1
Deliver within two working days by 5.30pm to the following postcodes areas:
HS2
PA60 - 75, 78
ZE2, 3
Deliver within three working days by 5.30pm to the following postcode areas:
KW16 - non Town
KW17
PH30, 41 - 44
Parcelforce / expedited Courier
Normally next day before 6 PM on workdays (no Saturday / Sundaly deliveries), except:
The following postodes have 2-3 day delivery times
AB30, AB31, AB33, AB34, AB35, AB36, AB37, AB38, AB41, AB42, AB43, AB44, AB45, AB51, AB52, AB53, AB54, AB55, AB56, AB63, DD10, DD8, DD9, FK17, FK18, FK19, FK20, FK21, HS1, HS2, HS3, HS4, HS5, HS6, HS7, HS8, HS9, IV1, IV10, IV11, IV12, IV13, IV14, IV15, IV16, IV17, IV18, IV19, IV2, IV20, IV21, IV22, IV23, IV24, IV25, IV26, IV27, IV28, IV3, IV30, IV31, IV32, IV36, IV4, IV40, IV41, IV42, IV43, IV44, IV45, IV46, IV47, IV48, IV49, IV5, IV51, IV52, IV53, IV54, IV55, IV56, IV6, IV63, IV7, IV8, IV9, KA27, KA28, KW1, KW10, KW11, KW12, KW13, KW14, KW15, KW16, KW17, KW2, KW3, KW5, KW6, KW7, KW8, KW9, PA20, PA21, PA22, PA23, PA24, PA25, PA26, PA27, PA28, PA29, PA30, PA31, PA32, PA33, PA34, PA35, PA36, PA37, PA38, PA39, PA40, PA41, PA42, PA43, PA44, PA45, PA46, PA47, PA48, PA49, PA60, PA61, PA62, PA63, PA64, PA65, PA66, PA67, PA68, PA69, PA70, PA71, PA72, PA73, PA74, PA75, PA76, PA77, PA78, PH10, PH11, PH13, PH14, PH17, PH18, PH19, PH20, PH21, PH22, PH23, PH24, PH25, PH26, PH30, PH31, PH32, PH33, PH34, PH35, PH36, PH37, PH38, PH39, PH40, PH41, PH42, PH43, PH44, PH49, PH50, TD15, ZE1, ZE2, ZE3
These postcodes are not available for AM courier delivery
AB30, AB31, AB33, AB34, AB35, AB36, AB37, AB38, AB39, AB41, AB42, AB43, AB44, AB45, AB51, AB52, AB53, AB54, AB55, AB56, AB63, DD10, DD8, DD9, FK15, FK16, FK17, FK18, FK19, FK20, FK21, FK8, HS1, HS2, HS3, HS4, HS5, HS6, HS7, HS8, HS9, IV1, IV10, IV11, IV12, IV13, IV14, IV15, IV16, IV17, IV18, IV19, IV2, IV20, IV21, IV22, IV23, IV24, IV25, IV26, IV27, IV28, IV3, IV30, IV31, IV32, IV36, IV4, IV40, IV41, IV42, IV43, IV44, IV45, IV46, IV47, IV48, IV49, IV5, IV51, IV52, IV53, IV54, IV55, IV56, IV6, IV63, IV7, IV8, IV9, KA27, KA28, KW1, KW10, KW11, KW12, KW13, KW14, KW15, KW16, KW17, KW2, KW3, KW5, KW6, KW7, KW8, KW9, PA20, PA21, PA22, PA23, PA24, PA25, PA26, PA27, PA28, PA29, PA30, PA31, PA32, PA33, PA34, PA35, PA36, PA37, PA38, PA39, PA40, PA41, PA42, PA43, PA44, PA45, PA46, PA47, PA48, PA49, PA60, PA61, PA62, PA63, PA64, PA65, PA66, PA67, PA68, PA69, PA70, PA71, PA72, PA73, PA74, PA75, PA76, PA77, PA78, PH10, PH11, PH13, PH14, PH16, PH17, PH18, PH19, PH20, PH21, PH22, PH23, PH24, PH25, PH26, PH30, PH31, PH32, PH33, PH34, PH35, PH36, PH37, PH38, PH39, PH40, PH41, PH42, PH43, PH44, PH49, PH50, ZE1, ZE2, ZE3