U-Bolt M10 x 70 mm Thread, 65 mm ID, 112 mm IH Galv A320 L7 High tensile steel
U-Bolt M6 x57 mm Thread, 31 mm ID, 75 mm IH Galv A320 L7 High tensile steelNuts not included with this itemGraphskill standard U-BoltASTM A320 L7 High Tensile Steel. Galvanised - A duller finish than BZP, typically 50 microns thick covering of Zinc and therefore provides much more protection suitable for many out door applicationsAll Measurements in mm Inside Diameter : 65 Inside Height : 113 Leg Centers : 75 Leg Length : 80 Material : A320 L7 Galvanised High tensile Steel Pipe Nominal Bore : Suggested Pipe OD : 63 Thread length : 70 Thread Size : M10Our manufacturing tolerances are + / - 1 mm) We use roll threading so the diameter of the bar is usually less than the thread size. Please ask if unsureIf using your own nuts on galvanised products please ensure they are tapped oversize to allow for the galvanised layer
|Material||A320 L7 Galvanised High tensile Steel|
We offer a range of delivery options based on the weight of the overall shopping cart and your specific location.
After adding the products to the shopping cart you will see a range of options based on delivery to mainland UK. Change country and the delivery options will be modified for your address.
NEED PART DELIVERY?
Every product page and the cart shows current stock level. Our normal practice is to only ship the full order, unless the shortfall is our fault.
If you can see we are short of stock and want to receive what we have as soon as possible, and the remainder when they are available, then add this product to the shopping cart also: