Insulating Rubber Lined U-bolt and Backing pad 120 mm ID (suit 100 mm NB pipe)-Galvanised
Insulating Rubber Lined U-bolt and Backing pad 120 mm ID (suit 100 mm NB pipe)-Galvanised
| Quantity | Discount | Unit price |
|---|---|---|
| 50 | 10% | £ 13.82 |
| 80 | 15% | £ 13.06 |
| 100 | 20% | £ 12.29 |
| 200 | 25% | £ 11.52 |
| 500 | 30% | £ 10.75 |
| 1000 | 35% | £ 9.98 |
| 2000 | 40% | £ 9.22 |
close
Accessories
Volume discounts
| Quantity | Price |
|---|---|
| 50 | 10% |
| 80 | 15% |
| 100 | 20% |
| 200 | 25% |
| 500 | 30% |
| 1000 | 35% |
| 2000 | 40% |
Insulating Rubber Lined U-bolt and Backing pad 120 mm ID (suit 100 mm NB pipe)
PAD:
Neoprene Rubber. A multi-purpose material suitable with weathering, sea water mineral oils and grease applications. Good flame retardant, excellent acid resistance, good ozone and oxidation resilience. Not suitable for resistance to aliphatic and aromatic hydrocarbons and ketones.
Elastomer: Neoprene
Colour: Black
Quality: Commercial
Grade: C20
Hardness: 65 shore A +/-5
S.G.: 1.4G/Cm3
Tensile MPA: 5 MIN
Elongation: 300%
Tear Strength: 20 Kg/CM
Compression Set: 35%
Operating Temperature: -20 / +110 C
SLEEVE:
300 psi Black Air Hose (ISO2398)
Application: For general workshop use and with compressors
Tube: Black NBR /SBR synthetic rubber
Reinforcement: Synthetic textile
Cover: Black, weather and ozone resistance SBR/EDPM.
Temperature range -20 / +90 C
Used to prevent galvanic corrosion due to the contact of dissimilar metals in the presence of an electrolyte.
Also, for the prevention of wear and / or crushing of composite, thin wall or non ferrous pipework
U-Bolt is Galvanised
C/W 2 nuts on each leg. If you want to use your own nuts please ensure they are galvanised and tapped oversize
NB = 100 mm
Pipe O/D = 114.3 mm
A = 120 mm
B = 141 mm
C = 170 mm
D = 12 mm
E = 77 mm
F = 110 mm
G = 57.5 mm
D*A (backing pad) = 25*10 mm
Galvanised - A duller finish than BZP, typically 50 microns thick covering of Zinc and therefore provides much more protection suitable for many out door applications
Tolerance on dimensions +/- 1 mm. Please note that as we use roll threading, the bar diameter is slightly less than the thread diameter
| Material | Galvanised |
| Pipe OD | 114.3 |
| Inside Diameter | 120 |
| Inside Height | 170 |
| Thread Size | M12 |
| Leg Centers | 141 |
| Leg Length | 110 |
| Thread length | 77 |
| Pipe Nominal Bore | 100 |
| Product Type | U-Bolt |
| Design | Rubber Lined - Insulating |
We offer a range of delivery options based on the weight of the overall shopping cart and your specific location.
After adding the products to the shopping cart you will see a range of options based on delivery to mainland UK. Change country and the delivery options will be modified for your address.
- Please be aware of our latest order times for same-day dispatch (2 PM)
- We ship orders every weekday
- Be aware of current stock levels (shown on the product page and the checkout page)
- Be aware of our shipping terms and conditions (CLICK HERE) which basically state we may upgrade delivery at our discretion and that we are not responsible for late deliveries outside of our control
NEED PART DELIVERY?
Every product page and the cart shows the current stock level. Our normal practice is to only ship the full order unless the shortfall is our fault.
If you can see we are short of stock and want to receive what we have as soon as possible, and the remainder when they are available, then add this product to the shopping cart also (UK Only):
