JBOLT/GALV/M10-16-95-25-60
New product
M10 Galvanised Mild Steel J Bolt 95 mm length 16 mm Inside Diameter
Quantity | Discount | Unit price |
---|---|---|
50 | 10% | £ 3.06 |
80 | 15% | £ 2.89 |
100 | 20% | £ 2.72 |
200 | 25% | £ 2.55 |
500 | 30% | £ 2.38 |
1000 | 35% | £ 2.21 |
2000 | 40% | £ 2.04 |
Quantity | Price |
---|---|
50 | 10% |
80 | 15% |
100 | 20% |
200 | 25% |
500 | 30% |
1000 | 35% |
2000 | 40% |
M10 Galvanised Mild Steel J Bolt 95mm length 16mm Inside Diameter
Dimensions are:
Thread Diameter (B): M10
Thread Length (C): 60mm
Overall Length (D): 95mm
Tail Length (E): 25mm
Inside Diameter (A): 16mm
Material Finish
Galvanised - A duller finish than BZP, typically 50 microns thick covering of Zinc and therefore provides much more protection suitable for many out door applications
Since hot-dip galvanizing typically adds 2.2 to 5mm of thickness to the threaded portion of a fastener, we advise using tapped oversize nuts to compensate for the corrosion resistant coating on the thread of the bolt
Tolerance on dimensions +/- 1mm. Please note that as we usually use roll threading, and the bar diameter is usually slightly less than the thread diameter
Material | Galvanised |
Inside Diameter | 16 |
Thread Size | M10 |
Thread length | 60 |
Product Type | J-Bolt |
Length | 95 |
Non-Threaded Leg Length | 25 |
Threaded Leg Length | 95 |
We offer a range of delivery options based on the weight of the overall shopping cart and your specific location.
After adding the products to the shopping cart you will see a range of options based on delivery to mainland UK. Change country and the delivery options will be modified for your address.
NEED PART DELIVERY?
Every product page and the cart shows the current stock level. Our normal practice is to only ship the full order unless the shortfall is our fault.
If you can see we are short of stock and want to receive what we have as soon as possible, and the remainder when they are available, then add this product to the shopping cart also (UK Only):