What is a bossed pipe clip / clamp - Graphskill's very own 1205 Series Munsen Rings

What is a bossed pipe clip / clamp - Graphskill's very own 1205 Series Munsen Rings

1205 Series Stainless Steel Pipe Support System

Graphskill has a patented, modular stainless steel pipe support system – the 1205 series. It was developed to accommodate the many different types of pipe support designs which have proven expensive to adopt in stainless steel. The unique design enables a multitude of design options all based on the Series 1205 bossed clip

The Series 1205 can be used to clamp, guide or hang pipes in position with a minimum of basic components

Advantages of the Series 1205 system

1205 schematic Brochure Picture

1205 Series Modular Pipe Clamps

> Availability – Stainless steel ex stock, non-standard within 24 hours
> One basic component for many supporting arrangements
> Versatile
> Space and cost-saving
> No Dissimilar metal considerations
> Easy insulation
> Load distribution
> No limitations on clip manufacture size
> Matrix development – single or multiple pipelines can be easily accommodated
1205 Image 1 Bossed Pipe Clip Image 1 1205 Image 1 Bossed Pipe Clip Image 2 1205 Image 1 Bossed Pipe Clip Image 3

1205 Series Bossed Pipe Clamp (Munsen Style)

 The '1205' can be used :

> as anchors where it is necessary to hold the pipe in all directions
> as guides where it is undesirable to restrict longitudinal movement
> in hanging applications
> in matrix formation

Bossed Pipe Clamp

What is a bossed pipe clamp? Sometimes called Munsen rings, bossed pipe clamps are very similar to a two bolt pipe clip, but with a threaded boss attached. The threaded boss allows the pipe clamp to be fixed to a base plate via a length of studding.

The added advantage is the matrix – connect multiple clamps in different orientations allows for great flexibility.

1205 Image 1 Bossed Pipe Clip Image 3

Bossed pipe clamp

1205 Image 1 Bossed Pipe Clip Image 5

Bossed pipe clamp matrix solution

The Graphskill Series 1205 (Patent No. 824062971 Stainless Steel Pipe Support System

The series 1205 pipe support system has been developed to accommodate the many different types of pipe support designs which have proven expensive to adopt in stainless steel. The unique design enables a multitude of design options all based on the Series 1205 bossed clip.

The Series 1205 clip can be used to clamp, guide or hang pipes in position with a minimum of basic components. Because these components can be used in a variety of ways, a complicated support system can be built with the minimum of technical design input.

A matrix of 1205 bossed clips can be built, hanging pipes from each other

You Can See our full range of bossed pipe clamps and backing plates here

Posted on 17/02/21 Pipe Support Systems 3229

Recently Viewed

No products

Menu

Settings